FRP ENVIRONMENTAL COVER SYSTEMS
SynTechnics Environmental Tank Cover Systems consist of monolithic molded sections with multiple layers of fiberglass and resin. Each panel is designed to meet or exceed customer specified structural loading and corrosion requirements. Interior surfaces are coated with a resin-rich finish to provide the proper corrosion resistance. Exterior panel surfaces are protected from outside environmental conditions by a specially formulated gelcoat which is integrated into the primary laminated and prevents UV penetration of the cover.
Fiberglass Environmental Cover System Applications:
- Odor Control
- Vapor Control
- UV Barrier for Algae Prevention
- Process Control
- Aesthetics Improvement
Dome Flat Segment Design
For moderate size circular tanks up to 53′ diameter where inside clearance is a factor.
DOWNLOAD PDF
Dome Scalloped Segment Design
For Large circular tanks up to 130’ where inside clearance is a factor.
DOWNLOAD PDF
Corrugated Arch Cover System
For smaller rectangular tanks up 18’ clear span, where inside clearance is needed.
DOWNLOAD PDF
Barrell Arch Cover System
For rectangular tanks up to 90’ clear span, where inside clearance is needed.
DOWNLOAD PDF
Corrugated Flat Cover System
For rectangular or circular tanks up to 35’ clear span, where inside clearance is not needed, and the foundation may be limited in carrying side thrust.
DOWNLOAD PDF
Scalloped Flat Cover System
For Rectangular or Circular tanks up to 50’ Clear Span where inside clearance is not needed, and the foundation may be limited in carrying side thrust.
DOWNLOAD PDF
Contact Syntechnics
FRP ENVIRONMENTAL COVER SYSTEMS
